December 7, 2023
Learn how to put weed eater string on with this step-by-step guide, complete with helpful tips and tricks. Watch a video tutorial, avoid common mistakes, and explore different weed eater string options with our product review. Perfect for beginners and experienced gardeners alike.


If you’re an avid gardener, you know the importance of having the right tools on hand. One essential tool is the weed eater, which helps keep your lawn and garden looking neat and tidy all year long. However, it can be frustrating when the string on your weed eater runs out and needs to be replaced. That’s why we’ve put together this a comprehensive guide on how to put weed eater string on, complete with step-by-step instructions, tips and tricks, and a product review. This article is perfect for beginners who may be using a weed eater for the first time, as well as experienced gardeners who need a refresher on how to change the string.

Step-by-Step Guide: How to Put Weed Eater String On

Changing weed eater string may seem daunting, but with this step-by-step guide, it couldn’t be easier.

1. Safety first: Before you begin, make sure the weed eater is turned off and unplugged or the battery is removed.

2. Remove the Spool: Locate the spool on the weed eater and remove it by pressing on the tabs on the side or bottom and pulling it away from the weed eater.

3. Remove the Old String: Remove any remaining old string on the spool and clean the spool to remove any dirt or debris.

4. Prepare the New String: Cut a length of new string based on the recommended length indicated for your weed eater model found in the user manual. Fold the string in half to find the center point and then place it in the slot located in the center of the spool.

5. Wind the String: Wind the string onto the spool in the direction indicated by the arrow on the spool or the user manual. Be sure to wind the string tightly, but without overlap. Leave 6-8 inches of string sticking out of the spool.

6. Thread the String: Find the exit holes on the spool. Thread one end of the string through the hole and out through the eyelet. Repeat this process with the other end.

7. Secure the Spool: Before placing the spool back onto the weed eater, make sure the string is positioned correctly. Insert the spool back into the weed eater and snap it into place.

8. Test the String: You’re now ready to test the weed eater by turning it on and observing the string spinning. If the string is not spinning or is too long or too short, re-adjust the string accordingly.

Video Tutorial: Putting Weed Eater String On

If you prefer a visual guide, check out this instructional video on how to put weed eater string on:

[Insert a helpful and informative video]

In this video, you’ll see how to put weed eater string on step-by-step. Plus, you’ll get helpful tips and tricks for getting the job done right.

Tips and Tricks

Here are some helpful tips and tricks to make the process of putting weed eater string on easier:

1. Choose the right string: Be sure to select a string that is appropriate for your specific weed eater model.

2. Keep the string from getting tangled: To prevent the string from tangling while you’re winding it onto the spool, place a small amount of petroleum jelly on the spool before starting.

3. Use a guide: If you’re having trouble winding the string in neat rows, consider using a guide to keep it in place.

Common Mistakes to Avoid

Some of the most common mistakes people make when putting weed eater string on include:

1. Overwinding the string: Overwinding the string can cause it to jam and will require the spool to be cleaned and re-wound.

2. Underwinding the string: Not adding enough string to the spool can cause the string to break and will require you to re-adjust it.

3. Mispositioning the string: Putting the string in the wrong slot or threading it through the wrong hole can cause the string to break or become tangled.

Product Review

There are many different brands and types of weed eater string on the market, each with their own pros and cons. Here are some of our top picks:

1. Oregon Gatorline Round String: This heavy-duty string is perfect for tough weeds and brush, while still being strong enough to handle residential use.

2. Husqvarna Titanium Force String: This high-quality string is long-lasting and durable, even in harsh conditions and professional settings.

3. Dewalt Premium XP String: This string is designed to be extremely tough and long-lasting, making it an ideal choice for commercial operators.


If you’re a gardener, knowing how to put weed eater string on is essential. With our step-by-step guide, video tutorial, tips and tricks, and product review, you’ll be changing the string on your weed eater like a pro in no time. Remember to always follow safety guidelines and choose the right type of string for your weed eater model. If you have any further questions or need additional assistance, feel free to reach out to us for more information.

Leave a Reply

Your email address will not be published. Required fields are marked *